EcoBoost Downpipe FITS Ford Mustang 2015+

$ 749.00$ 883.00

or 4 fortnightly payments from $ 187.25 with Afterpay More info

Mishimoto continues to expand on our line of performance exhaust system components! After months of development and testing,



EcoBoost Downpipe FITS Ford Mustang 2015+

Direct fit for the 2015+ Ford Mustang EcoBoost
Fits with both manual and automatic transmissions
Extremely aggressive turbo and exhaust tone under acceleration and boost
304 Stainless Steel 2-piece design allows for uninterrupted exhaust flow and an easy installation
Includes stainless steel
2-bolt mounting flange to the turbo
3″ exhaust diameter for maximum flow
Additional wideband O2 sensor bung for aftermarket wideband sensors
Mates with the stock cat-back exhaust or any aftermarket exhaust with a 2.25″ mid-pipe
High flow catalytic converter (optional)
Mishimoto Lifetime Warranty

Mishimoto continues to expand on our line of performance exhaust system components! After months of development and testing, Mishimoto has released the stainless steel downpipe for the Ford Mustang EcoBoost! This downpipe was designed with maximum exhaust flow in mind, using 3″ mandrel-bent stainless steel tubing.

This downpipe will easily outflow the stock restrictive piece, and allow your EcoBoost Mustang to make maximum power and torque! With this downpipe installed on our EBM Mustang and the ECU re-flashed with a more aggressive tune, the engine was able to make an additional 65whp and 108wtq over stock with our catted downpipe installed. With the Mishimoto catless downpipe installed, we produced additional gains of 9.8 whp and 8.3 wtq over the catted model, making this a great option for those seeking maximum power output.

The Mishimoto downpipe was also designed to be easy to install, as well as adaptable to many exhaust configurations. We know there are many choices out there for cat-back exhausts, and the included 3.0″-2.25″ adapter allows easy mating to the stock exhaust or most aftermarket cat-back exhausts with the stock-sized 2.25″ mid-pipe. The adapter can also be omitted so the downpipe has a 3.0″ V-band outlet to mate up to a custom exhaust or the upcoming Mishimoto Cat-Back Exhaust to make a full 3″ downpipe/mid-pipe combination.

The two-piece downpipe design allows for easier installation without wrestling a large bulky pipe into place. The Mishimoto downpipe comes with all of the necessary clamps and flanges you’ll need for installation and mates perfectly to your stock turbo gasket, making the need to purchase additional gaskets or hardware unnecessary! Like all of our EcoBoost Mustang parts, this downpipe comes with the Mishimoto Lifetime Warranty!

Purchase Includes
(1) Stainless Steel, 2-piece downpipe with floating 2-bolt flange, slip joint connector, and V-band flange
(1) High Flow Catalytic Converter (optional)
(1) 3.0″ Slip Joint Clamp
(1) 3.0″ V-band Clamp
(1) 3.0″ to 2.25″ exhaust adapter (for use with stock exhaust or most aftermarket cat-back exhaust with a 2.25″ mid-pipe)
Mishimoto Lifetime Warranty
Note This product fits both stock and automatic transmissions, there are no additional parts needed for automatic transmission fitment. This downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle’s ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle, and other supporting modifications that are installed.

The Mishimoto downpipe is for track and off-road use only. The customer must have a professional engine tune/calibration after installing the downpipe.

304 Stainless Steel

200 Cell Spun Metallic Core
Fits 2015+ Ford Mustang EcoBoost
Engine Codes 2.3L EcoBoost
Chassis Codes S-550
Diameter 3.0″ from Turbo to V-band
3.0″ tapering to 2.25″ and the end of the exhaust adapter
Flange Material 304 Stainless Steel
Pipe Material 304 Stainless Steel

Additional information

Weight N/A
Dimensions N/A