The all-new Type-R Subwoofers now offer unique Alpine technology and massive power handling to achieve even cleaner and deeper bass extension, faster and more accurate transients, and greater output capability. With more power handling and patented Alpine technology for lower distortion and higher SPL, the new Type-R subs take performance to all new heights.

Features
Kevlar-Reinforced Carbon Fibre Cone
Aluminium honeycomb
Kevlar-Reinforced pulp for maximum strength
High-efficiency thermal management
High-Amplitude Multi-Roll Surround
heavy-gauge push terminals
Peak Power Handling: 3000W
RMS Power Handling: 600W
Nominal Impendance: 2ohms+2ohms
Frequency Response: 26Hz-200Hz
Mounting Dimensions: 275mm diameter x 161.8mm depth

Specifications

General
Sealed: 12″
Frequency Response: 24Hz-200Hz
Power Range: 300W – 1000W RMS
RMS Power Handling: 1000W
Peak Power Handling: 3000W
Magnet Weight: 127oz
Voice Coil Diameter: 65.5 mm (2.6″)

Thiel-Small Parameters
Sensitivity (1W/1m): 84.7dB
DC Resistance: 1.95ohms + 1.95ohms
Inductance: 2.23 mH
Free Air Resonance: 27 Hz
Equivalent Stiffness: 46L
Mechanical Q: 7.1
Electrical Q: 0.47
Total Q: 0.44
Cone Area: 479cm²
Linear Excursion: 20 mm
Mechanical Travel: 72 mm
Note: Specifications are subject to change without notice.

Sealed box range
Net Internal Volume: 0.55-1.0 ft³

Recommended Sealed Box
External box dimensions: 14″x14″x11″
Gross internal volume: 0.85 ft³
Net internal volume: 0.75 ft³
F3, Qtc: 45 Hz, 0.75

Vented box range
Net internal volume: 1.0-1.5 ft³
Tuning: 32-37 Hz

Recommended vented box
External box dimensions: 23″ x 12.5″ x 14″
Gross internal volume: 1.71 ft³
Dimensions: 12.5in² (12.5″x1″)
Gross internal volume: 19″
Vent displacement: 0.23 ft³
Net internal volume (Vb): 1.38 ft³
F3, ripple, Fb: 29Hz, 4.6dB, 35Hz

Notes:
Recommended enclosure net internal volume is based upon 3/4″ (19mm) MDF enclosure construction.
Consult below for alternative enclosure net internal volume calculation.

Front mount displacement* (magnet in): -0.10 ft³
Reverse mount added volume* (magnet out): +0.09 ft³
Based upon 3/4″ (19mm) baffle thickness, with opening cut approximately to gasket inner diameter.

RRP $329

For a competative price call us on 08 83462555

The post Alpine Alpine SWR-12D2 Type-R 12inch Subwoofer 3000Wmax 1000Wrms appeared first on Car Toys.

The all-new Type-R Subwoofers now offer unique Alpine technology and massive power handling to achieve even cleaner and deeper bass extension, faster and more accurate transients, and greater output capability. With more power handling and patented Alpine technology for lower distortion and higher SPL, the new Type-R subs take performance to all new heights.

Features
Kevlar-Reinforced Carbon Fibre Cone
Aluminium honeycomb
Kevlar-Reinforced pulp for maximum strength
High-efficiency thermal managAlpine SWR-12D4 Type-R 12inch Subwoofer 3000Wmax 1000Wrmsement
High-Amplitude Multi-Roll Surround
heavy-gauge push terminals
Peak Power Handling: 3000W
RMS Power Handling: 1000W
Nominal Impendance: 4ohms+4ohms
Frequency Response: 26Hz-200Hz
Mounting Dimensions: 275mm diameter x 161.8mm depth

Specifications

General
Sealed: 12″
Frequency Response: 24Hz-200Hz
Power Range: 300W – 1000W RMS
RMS Power Handling: 1000W
Peak Power Handling: 3000W
Magnet Weight: 127oz
Voice Coil Diameter: 65.5 mm (2.6″)

Thiel-Small Parameters
Sensitivity (1W/1m): 84.9dB
DC Resistance: 3.8ohms + 3.8ohms
Inductance: 3.33 mH
Free Air Resonance: 28 Hz
Equivalent Stiffness: 46L
Mechanical Q: 6.04
Electrical Q: 0.52
Total Q: 0.48
Cone Area: 479cm²
Linear Excursion: 20 mm
Mechanical Travel: 72 mm
Note: Specifications are subject to change without notice.

Sealed box range
Net Internal Volume: 0.55-1.0 ft³

Recommended Sealed Box
External box dimensions: 14″x14″x11″
Gross internal volume: 0.85 ft³
Net internal volume: 0.75 ft³
F3, Qtc: 45 Hz, 0.81

Vented box range
Net internal volume: 1.0-1.5 ft³
Tuning: 32-37 Hz

Recommended vented box
External box dimensions: 23″ x 12.5″ x 14″
Gross internal volume: 1.71 ft³
Dimensions: 12.5in² (12.5″x1″)
Gross internal volume: 19″
Vent displacement: 0.23 ft³
Net internal volume (Vb): 1.38 ft³
F3, ripple, Fb: 29Hz, 4.4dB, 35Hz

Notes:
Recommended enclosure net internal volume is based upon 3/4″ (19mm) MDF enclosure construction.
Consult below for alternative enclosure net internal volume calculation.
Front mount displacement* (magnet in): -0.10 ft³
Reverse mount added volume* (magnet out): +0.09 ft³
Based upon 3/4″ (19mm) baffle thickness, with opening cut approximately to gasket inner diameter.

RRP $329

The post Alpine Alpine SWR-12D4 Type-R 12inch Subwoofer 3000Wmax 1000Wrms appeared first on Car Toys.

This Type-R 10″ Thin Subwoofer comes already built into a specially custom made sub box. Ready to be installed without the hassle of building a box for your subwoofer.

Features
Custom carbon fibre look sealed subwoofer enclosure
SWR-T10 subwoofer pre-installed
High density construction
Heavy gauge screw terminals
Grille with chrome badge included
Concealed mounting frame included

Specifications

Dimensions
Length 47cm x Width 40cm x Height 16cm

Diaphram
Material: Aluminum
Design: Structural Parabolic w/ Force Transfer Assembly

Surround
Material: Injected Molded Santoprene
Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)

Spider
Material: Thermoplastic Elastomer (TPE)
Design: Co-Molded Regressive w/ Integrated Tinsel Leads

Voice Coil
Material: 220C Edge-Wound Copper Ribbon Wire
Design: Oversized 100mm (4”) Underhung Voice Coil

Motor Structure
Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through
Gap Design (Patent #6,639,993, 2 Patents Pending)
Configuration: Radial Vented VC Heat Sink Shorting Sleeve w/ Airflow
Management System (Patent 7,634,101)

Frame
Material: Cast Aluminum
Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design

Terminals
Layout: One Side
Design: Heavy Duty Gold-Plated Insert Block Terminals

Tinsel Leads
Design: Woven Spider Integration Design

Gasket
Design: Concealed MountGasket System (US Patent #7,760,900)

Power Handling
CEA-2031 Power Rating: 600W
Power Range: 300 – 600 Watts
RMS Power Handling: 600W
Peak Power Handling: 1800 Watts

General
Frequency Response: 28Hz – 200Hz

RRP $799

For a competative price call us on 08 83462555

The post Alpine SBR-S10T Type-R 10″ Thin Subwoofer Enclosure appeared first on Car Toys.

The SBR-S12D4 is a slot ported box designed and engineered in the USA, featuring the new 12″ Type-R Subwoofer capable of handling a massive 1000 watts RMS!

This stylish enclosure is perfectly matched to the subwoofer for optimum output and sound quality. Built to play low and loud, the SBR-S12D4 delivers powerful, clean bass with exceptional accuracy and deeper bass excursion.

With new aesthetics and improved power handling over previous models, the new SBR-S12D4 sets the benchmark for looks and performance.

Features
Kevlar-Reinforced Carbon Fibre Cone
High Amplitude Multi Roll (HAMR) surround
Designed and Engineered in USA
Slot port box design
Heavy gauge screw terminals
3000W Peak Power
1000W RMS Power
Voice Coil configuration: 4ohm + 4ohm
Frequency Response: 26Hz-200Hz
Dimensions: (L x H x Wcm) 45 x 43 x 41

Specifications

General
Sealed: 12″
Frequency Response: 24Hz-200Hz
Power Range: 300W – 1000W RMS
RMS Power Handling: 1000W
Peak Power Handling: 3000W
Magnet Weight: 127oz
Voice Coil Diameter: 65.5 mm (2.6″)

Thiel-Small Parameters
Sensitivity (1W/1m): 84.9dB
DC Resistance: 3.8ohms + 3.8ohms
Inductance: 3.33 mH
Free Air Resonance: 28 Hz
Equivalent Stiffness: 46L
Mechanical Q: 6.04
Electrical Q: 0.52
Total Q: 0.48
Cone Area: 479cm²
Linear Excursion: 20 mm
Mechanical Travel: 72 mm
Note: Specifications are subject to change without notice.

RRP $499

For a competative price call us on 08 83462555

The post Alpine SBR-S12D4 Type-R 12″ Subwoofer Enclosure appeared first on Car Toys.

This Type-R 12″ Thin Subwoofer comes already built into a specially custom made sub box. Ready to be installed without the hassle of building a box for your subwoofer.

Features
Custom carbon fibre look sealed subwoofer enclosure
SWR-T12 subwoofer pre-installed
High density construction
Heavy gauge screw terminals
Grille with chrome badge included
Concealed mounting frame included

Specifications

Dimensions
Length: 52 cm x Width: 43 cm x Height: 18 cm

Diaphram
Material: Aluminum
Design: Structural Parabolic w/ Force Transfer Assembly

Surround
Material: Injected Molded Santoprene
Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)

Spider
Material: Thermoplastic Elastomer (TPE)
Design: Co-Molded Regressive w/ Integrated Tinsel Leads

Voice Coil
Material: 220C Edge-Wound Copper Ribbon Wire
Design: Oversized 100mm (4”) Underhung Voice Coil

Motor Structure
Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through
Gap Design (Patent #6,639,993, 2 Patents Pending)
Configuration: Radial Vented VC Heat Sink Shorting Sleeve w/ Airflow
Management System (Patent 7,634,101)

Frame
Material: Cast Aluminum
Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design

Terminals
Layout: One Side
Design: Heavy Duty Gold-Plated Insert Block Terminals

Tinsel Leads
Design: Woven Spider Integration Design

Gasket
Design: Concealed MountGasket System (US Patent #7,760,900)

Power Handling
CEA-2031 Power Rating: 600W
Power Range: 300 – 600 Watts
RMS Power Handling: 600W
Peak Power Handling: 1800 Watts

General
Frequency Response: 26Hz – 200Hz

RRP $799

For a competative price call us on 08 83462555

The post Alpine SBR-S12T Type-R 12″ Thin Subwoofer Enclosure appeared first on Car Toys.

The SBR-S83V features Alpine’s Type-R 8″ subwoofer in a custom slot ported enclosure. Ideal for installation in small spaces, its compact size means it can fit virtually anywhere.

The pre-installed subwoofer employs many features typically found in larger models, such as Alpine’s H.A.M.R (High Amplitude Multi Roll) suspension. This unique design allows greater linear excursion while improving control, to achieve maximum output and oustanding sound quality.

Designed to achieve optimal output, the carpeted enclosure features heavy duty MDF construction. Plus, stylish brushed aluminium laminate and a robust grill create the perfect balance of stunning aesthetics and practicality.

Features
900W Peak Power
300W RMS Power
High Amplitude Multi Roll (HAMR) surround
Frequency Response: 28Hz – 400Hz
USA Designed Slot Ported Subwoofer Enclosure
Heavy Gauge Spring Terminals
Dimensions: (L x W x H cm) 49 x 29 x 16
SWR-823D Pre-installed
Grille Included

Specifications
Subwoofer Size: 8″
Power Handling (RMS/Peak): 350W/1000W
Power Range (RMS): 150W-350W
Frequency Response (Hz): 28Hz-200Hz
Diaphragm Material: Kevlar-Reinforced Pulp Fiber
Diaphragm Design: 2-piece structural parabolic
Surround Material: Injection molded santoprene
Surround Design: High Amplitude Multi-Roll (Patent Pending)
Spider Material: Nomex
Spider Design: Progressive
Voice Coil Material: 180˚C High Temp Wire on Spiral Cut Aluminium Former
Voice Coil Design: 4-Layer Dual Voice Coil
Motor Structure Pole Geometry: Compound Radius Curve
Motor Structure Configuration: Integration Shorting Sleeve with Radial Vented VC Head Transfer
Magnet Material: High-Power Strontium Ferrite
Magnet Configuration: 6-Piece (8″) / 10-Piece (10″/12″) Radially Segmented, Double Stacked
Frame Material: Cast Aluminium
Frame Design: Single-Piece Casting with Airflow Management System
Terminals Layout: One sided
Terminals Design: Heavy Duty 8ga, Push with housing, Banana Sockets for VC Configuration Jumpers
Tinsel Leads Design: Reinforced Layer Spider Integration
Gasket Design: Concealed Mount Gasket System and Integrated Grill Ready

ELECTRO-MECHANICAL PARAMETERS
Nominal Impedance: 2ohms+2ohms
Frequency Response: 28-200Hz
Sensitivity (SPL @ 1W/1m): 83.5dB
D.C Coil Resistance (Re): 1.85ohms +1.85ohms
Inductance (Le) 1kHz/20kHz: 0.87mH/0.30mH
Free Air Resonance (Fs): 38Hz
Equivalent Stiffness (Vas): 12L (0.42 ft³)
Mechanical Q (Qms): 7.8
Electrical Q (Qes): 0.55
Total Q (Qts): 0.50
Xmax10 (One-Way Xmax @ 10% Distortion): 14mm
Mechanical Excursion, Peak-to-Peak: 52mm
Gap Height (Hag): 10mm
Coil Height (Hvc): 29mm
Cone Area (Sd): 201 cm²
Voice Coil Diameter: 40mm (1.6″)
Magnet Weight: 52oz

RRP $299

For a competative price call us on 08 83462555

The post Alpine SBR-S83V Type-R 8″ Subwoofer Enclosure appeared first on Car Toys.

Featuring Alpine’s HAMR (High Amplitude Multi Roll) surround previously only found on Type-R and Type-X subwoofers, the new Type-S subs play louder and lower than ever before. Plus, improved power handling and an advanced airflow system mean they can produce more bass non-stop. With an aluminium look cone and stylish carpeted box, this subwoofer in enclosure looks as good as it sounds.

Features
High Grade MDF Construction
SWS-15D4 Pre-installed
500W RMS Power Handling
1500W Peak Power Handling
Heavy Gauge Screw Terminals
Dimensions (L x W x H) 490mm x 530mm x 390mm

Specifications
Power Range: 150W – 500 Watts
RMS Power Handling: 500W
Peak Power Handling: 1500W
Frequency Response: 24Hz – 200Hz

RRP $399

For a competative price call us on 08 83462555

The post Alpine SBS-S15D4 Type-S 15″ Subwoofer Enclosure appeared first on Car Toys.

Add more bass to your system with Alpine’s SWE-1200. With its compact size and stylish design the SWE-1200 can be mounted virtually anywhere in a vehicle, even under a seat. A seperate amplifier with RCA and speaker inputs allows connection to virtually any head unit.

Features
Variable Low Pass Filter
Gain Adjustment
Phase Selector Switch
RCA and Speaker Inputs
Wired Remote Control Included

Specifications
Max Power Output: 150W
Crossover: 50 to 120Hz (-12dB/oct)
Phase: 0°, 180°
Input Impedance:
22kΩ (Line Input)
5.9kΩ (Speaker Input)
Power Requirement: DC 14.4V (11~16V allowable)
Earth Type: Negative Earth
Dimensions: 280mm x 75mm x 220mm
Weight (Subwoofer Box/Amplifier): 2.55kg/0.35kg

RRP $449

For a competative price call us on 08 83462555

The post Alpine SWE-1200 Powered Compact Subwoofer appeared first on Car Toys.

Add more bass to your system with Alpine’s all new SWE-1500. With its compact size and stylish design the SWE-1500 can be mounted virtually anywhere in a vehicle, even under a seat. A seperate amplifier with speaker level inputs allows connection to virtually any head unit. Plus, the included bass level controller allows adjustments to be made right from the drivers seat.

Features
150W Max Amplifier
Seperate Amplifier
Speaker Level Inputs
Compact Design
Bass level controller included

Specifications
Dimensions: 257mm x 66.3mm x 192mm

RRP $499

For a competative price call us on 08 83462555

The post Alpine SWE-1500 Powered Compact Subwoofer appeared first on Car Toys.

The all-new Type-R Subwoofers now offer unique Alpine technology and massive power handling to achieve even cleaner and deeper bass extension, faster and more accurate transients, and greater output capability. With more power handling, and patented Alpine technology for lower distortion and higher SPL, the new Type-R subs take performance to all new heights.

Features
Kevlar-Reinforced Carbon Fibre Cone
Aluminium honeycomb
Kevlar-Reinforced pulp for maximum strength
High-efficiency thermal management
High-Amplitude Multi-Roll Surround
heavy-gauge push terminals
Peak Power Handling: 3000W
RMS Power Handling: 1000W
Nominal Impendance: 2ohms+2ohms
Frequency Response: 26Hz-200Hz
Mounting Dimensions: 230.5mm diameter x 149mm depth

Specifications

General
Sealed: 10″
Frequency Response: 26Hz-200Hz
Power Range: 300W – 1000W RMS
RMS Power Handling: 1000W
Peak Power Handling: 3000W
Magnet Weight: 111oz
Voice Coil Diameter: 65.5 mm (2.6″)

Thiel-Small Parameters
Sensitivity (1W/1m): 82dB
DC Resistance: 1.95ohms + 1.95ohms
Inductance: 1.89 mH
Free Air Resonance: 31 Hz
Equivalent Stiffness: 18L
Mechanical Q: 7.84
Electrical Q: 0.54
Total Q: 0.51
Cone Area: 333cm²
Linear Excursion: 20 mm
Mechanical Travel: 70 mm
Note: Specifications are subject to change without notice.

Sealed box range
Net Internal Volume: 0.4/0.85 ft³

Recommended Sealed Box
External box dimensions: 12″x12″x10.5″
Gross internal volume: 0.58 ft³
Net internal volume: 0.50 ft³
F3, Qtc: 46 Hz, 0.74

Vented box range
Net internal volume: 0.75-1.3 ft³
Tuning: 35-39 Hz

Recommended vented box
External box dimensions: 23″ x 12″ x 11.5″
Gross internal volume: 1.3 ft³
Dimensions: 10in² (10″x1″)
Gross internal volume: 20″
Vent displacement: 0.2 ft³
Net internal volume (Vb): 1.0 ft³
F3, ripple, Fb: 29Hz, 6.1dB, 36Hz

Notes:
Recommended enclosure net internal volume is based upon 3/4″ (19mm) MDF enclosure construction.
Consult below for alternative enclosure net internal volume calculation.

Front mount displacement* (magnet in): -0.08 ft³
Reverse mount added volume* (magnet out): +0.05 ft³
Based upon 3/4″ (19mm) baffle thickness, with opening cut approximately to gasket inner diameter.

RRP $349

For a competative price call us on 08 83462555

The post Alpine SWR-10D2 Type-R 10″ Subwoofer appeared first on Car Toys.