Alpine SWR-T10 10″ Thin Subwoofer

send an inquiry for this item

Insert Name
Insert Email
Insert Message
Share on:
  • Description

    Product Description

    SWR-T10 10″ Thin Subwoofer
    Alpine’s Type-R Thin Subwoofers have been engineered to offer greater installation flexibility. At only 82mm deep the SWR-T10 provides deep bass performance where traditional subwoofers just can’t fit.

    Boasting several unique Alpine technologues in its industry-first design, these innovations allow the Type-R Thin to have the output and power handling of the traditional Type-R series in less that half the depth. An all-new FEA Optimised motor structure and HAMR surround give the new Type-R Thin subwoofers the highest X-max and SPL output in their class. Alpine’s patent pending Pass-Through Gap Geometry, allows the unique Thermoplastic Elastomer Segmented Spider to completely pass through the motor structure. This means the cone and voice coil assembly have the clearance needed for over 50mm of peak-to-peak excursion, allowing for massive output even in such a shallow frame.

    The new Type-R Thin design has the same DNA of the standard Type-R subs – demanding cleaner, deeper bass extension, faster, more accurate transients and even greater output capability.


    Material: Aluminum
    Design: Structural Parabolic w/ Force Transfer Assembly

    Material: Injected Molded Santoprene
    Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)

    Material: Thermoplastic Elastomer (TPE)
    Design: Co-Molded Regressive w/ Integrated Tinsel Leads

    Voice Coil
    Material: 220C Edge-Wound Copper Ribbon Wire
    Design: Oversized 100mm (4”) Underhung Voice Coil

    Motor Structure
    Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through Gap Design (Patent #6,639,993, 2 Patents Pending)
    Configuration: Radial Vented VC Heat Sink & Shorting Sleeve w/ Airflow Management System (Patent 7,634,101)

    Material: Cast Aluminum
    Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design

    Layout: One Side
    Design: Heavy Duty Gold-Plated Insert Block Terminals

    Tinsel Leads
    Design: Woven Spider Integration Design

    Design: Concealed Mount Gasket System (US Patent #7,760,900)


    Power Handling
    CEA-2031 Power Rating: 600W
    Power Range: 300 – 600 Watts
    RMS Power Handling: 600W
    Peak Power Handling: 1800W

    Mounting Depth: 82 mm (3.25”)
    Mounting Diameter: 231 mm (9.1”)
    Displacement: 0.07 cu. ft (Front Mount)
    Added Volume: 0.04 cu. ft. (Reverse Mount, Magnet Out)

    Frequency Response: 28Hz – 200Hz
    FEA Optimised HAMR Surround
    Thermoplastic Elastomer Spider
    4″ Voice Coil
    Radial Vented VC Heatsink
    4ohm Impedance
    Aluminium Cone
    Cast Aluminium Frame

    Sealed Enclosure size
    Recommended: 10.0L

    Vented Enclosure size
    Recommended Volume: 17.0L
    Round Port Dia. x L (cm): 7 x 43
    Slot Port W x H x L (cm): 9 x 4 x 43

    RRP $549

    For a competative price call us on 08 83462555