Alpine PDX-V9 4 Channels + Mono Power Density Digital Amplifier

send an inquiry for this item

Insert Name
Insert Email
Insert Message
Share on:
  • Description

    Product Description

    PDX-V9 4 Channels + Mono Power Density Digital Amplifier

    This audiophile range of PDX series amplifiers are designed and engineered for ultimate sound quality, power, performance and reliability. These sleek and stylish amplifiers have been re-designed from the ground up to deliver an amplifier range that not only look amazing, they perform flawlessly.

    Incorporating new technology to maximise sonic quality, the new PDX amplifiers deliver extremely low distortion levels, wide bandwidth and industry leading S/N ratios. The new PDX amplifiers have an exceptionally high damping factor, more than 500 for the multi-channel PDX-V9. What’s more, the all-new PDX amplifiers are 20% smaller than the first generation models and their unique stacking design allows for a large multi amplifier system to be installed virtually anywhere.

    These new PDX amplifiers are for the true car audio enthusiast, providing exceptional sound quality and performance.


    Connectors: Quick Connect Terminals for Power Supply and Speaker Output
    Terminal Layout: One-Sided
    Mounting Design: Easy Stacking and Smart Installation

    Amplifier Type: Class-D (Digital)
    Channel Design: 4-channel + 1-channel (Mono)
    Power Supply Design: DC-DC PWM Power Supply
    Pre-Amp Stage: Discreet
    Final Outputs: MOSFET
    Crossover: Variable High Pass, Low Pass and Band Pass Filter
    Gain Control: Continuously Adjustable Gain Control
    Subsonic Filter: Variable Subsonic Filter
    Bass Control: Remote Bass Control (RUX-KNOB) Ready
    Low-battery Protection
    Low-impedance Possibility
    Current Protection: Over-Current, Over-Voltage and Thermal Protection
    Board Circuitry: S.T.A.R. Circuit
    Board Design: 6-layer Glass Epoxy PC Board
    Power Indicator: Top Mounted LED Power/Status Indicator
    Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
    Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
    Thermal Control: Thermal Management Control

    CEA-2006 Power Ratings
    CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N) Max Power Output Ratings Max Power: 1600W RMS Power Ratings Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N) Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N) Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N) Sound Tuning Crossover Frequency (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6k Hz (x10), -12 dB/oct. Crossover Frequency (CH3/4, HPF): 30 - 600 Hz (x1), -12 dB/oct. Crossover Frequency (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6k Hz (LPF), -12 dB/oct. Crossover Frequency (Subwoofer): 50 - 600 Hz, -24 dB/oct. Subsonic Filter: 3 - 30 Hz, -24 dB/oct. Dimensions Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm Foot Print (WxHxD) in: 10-1/8'' x 2'' x 7-1/2'' General Power Requirements: 14.4 V.DC (11-16 V allowable) Input Sensitivity (RCA Input): 0.2 - 4 V (CH1/2, CH3/4), 0.1 - 4 V (Subwoofer) Input Impedance: >10k ohms
    Frequency Response (+0, -3dB: 1W into 4 Ohms):
    CH-1/2/3/4: 3 – 100k Hz
    Subwoofer: 3 – 600 Hz
    THD+N (10W into 4 Ohms):
    CH-1/2/3/4: <0.005 % Subwoofer: <0.006 % THD+N (Rated Power into 4 Ohms): CH-1/2/3/4: <0.03 % Subwoofer: <0.05 % Damping Factor: CH-1/2/3/4: >500 into 4 ohms at 100Hz
    Subwoofer: >1000 into 4 ohms at 100Hz
    Signal to Noise (Rated Power into 4 Ohms):
    CH-1/2/3/4: 112 dB
    Subwoofer: 119 dB
    Weight: 2.7 kg

    *Note: Specifications and design are subject to change without notice.

    RRP $899

    For a competative price call us on 08 83462555