SWR-T12
SWR-T12(2)SWR-T12(1)

Alpine SWR-T12 Thin 12inch subwoofer 600Wrms

send an inquiry for this item

Insert Name
Insert Email
Insert Message
Share on:
  • Description

    Product Description

    Alpine SWR-T12 Thin 12inch subwoofer 600Wrms

    Alpine’s Type-R Thin Subwoofers have been engineered to offer greater installation flexibility. At only 89mm deep the SWR-T12 provides deep bass performance where traditional subwoofers just can’t fit.

     

    Boasting several unique Alpine technologues in its industry-first design, these innovations allow the Type-R Thin to have the output and power handling of the traditional Type-R series in less that half the depth. An all-new FEA Optimised motor structure and HAMR surround give the new Type-R Thin subwoofers the highest X-max and SPL output in their class. Alpine’s patent pending Pass-Through Gap Geometry, allows the unique Thermoplastic Elastomer Segmented Spider to completely pass through the motor structure. This means the cone and voice coil assembly have the clearance needed for over 50mm of peak-to-peak excursion, allowing for massive output even in such a shallow frame.

     

    The new Type-R Thin design has the same DNA of the standard Type-R subs – demanding cleaner, deeper bass extension, faster, more accurate transients and even greater output capability.

    Price: $599

    Features

    Diaphram

    • Material: Aluminum
    • Design: Structural Parabolic w/ Force Transfer Assembly

    Surround

    • Material: Injected Molded Santoprene
    • Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)

    Spider

    • Material: Thermoplastic Elastomer (TPE)
    • Design: Co-Molded Regressive w/ Integrated Tinsel Leads

    Voice Coil

    • Material: 220C Edge-Wound Copper Ribbon Wire
    • Design: Oversized 100mm (4”) Underhung Voice Coil

    Motor Structure

    • Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through Gap Design (Patent #6,639,993, 2 Patents Pending)
    • Configuration: Radial Vented VC Heat Sink & Shorting Sleeve w/ Airflow Management System (Patent 7,634,101)

    Frame

    • Material: Cast Aluminum
    • Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design

    Terminals

    • Layout: One Side
    • Design: Heavy Duty Gold-Plated Insert Block Terminals

    Tinsel Leads

    • Design: Woven Spider Integration Design

    Gasket

    • Design: Concealed Mount Gasket System (US Patent #7,760,900)

    Specifications

    Power Handling

    • CEA-2031 Power Rating: 600W
    • Power Range: 300 – 600 Watts
    • RMS Power Handling: 600W
    • Peak Power Handling: 300 – 600 Watts

    Dimensions

    • Mounting Depth: 89 mm (3.5”)
    • Mounting Diameter: 275mm (10.85”)
    • Displacement: 0.08 cu. ft (Front Mount)
    • Added Volume: 0.05 cu. ft. (Reverse Mount, Magnet Out)

    General

    • Frequency Response: 26Hz – 200Hz
    • FEA Optimised HAMR Surround
    • Thermoplastic Elastomer Spider
    • 4″ Voice Coil
    • Radial Vented VC Heatsink
    • 4ohm Impedance
    • Aluminium Cone
    • Cast Aluminium Frame

    Sealed Enclosure size

    • Recommended: 17.0L

    Vented Enclosure size

    • Recommended Volume: 28.3L
    • Round Port Dia. x L (cm): 10 x 34
    • Slot Port W x H x L (cm): 10 x 7 x 37